“In recent years, LED lamps have emerged as a fresh force and nearly monopolized the home decoration lamp market. More and more people are choosing LED lights that are bright and save electricity, but many people are not sure how to install LED lights. China black led neon flex manufacturer says, in fact, changing an LED lamp is as simple as changing a light bulb back in the day. You can do it yourself.
LED light bulb
This lamp is the earliest form of LED lamp, the lamp port is the same as an incandescent lamp.
Thus replacing this bulb is the same process as replacing an incandescent bulb. Simply rotate the current LED bulb into the light socket.
LED lamp tube
If the lamp is newly installed, you can directly buy the whole set of lamps (lamp holder + lamp tube).
When installing, open the lamp stand to remove the base, drill holes and fix it on the ceiling. Draw the neutral wire and live wire from the junction box reserved on the ceiling through the base. Take the top cover, there is a power cord in the cover, and connect with the zero live wire. Connect the top cover to the bottom seat.
When installing the lamp tube, insert one side into the lamp stand first, force to the top of the inserted side, and insert the remaining side.
If it is a fluorescent LED tube, you can use the original antique lamp holder. However, before installing the LED lamp, the original ballast needs to be removed first. The lamp tube installation method is the same as the newly installed lamp tube.
Of course, now on the market has been common integration of LED light tube. This tube does not need to install a separate lamp holder and tube, but the brightness is low, commonly used for ceiling decoration lights.
LED spotlight
There are numerous kinds of spotlights, here only the circular hole spotlights commonly used in families.
The spotlights are normally installed in the ceiling. If the number of junction boxes reserved in the ceiling is insufficient, you can directly route cables in the ceiling to connect the spotlights.
When installing a spotlight, connect the initiator first. Pay attention to the sequence of incoming and outgoing cables of the initiator.
After that, put the initiator into the suspended ceiling, and connect the spotlights to the initiator. Push up the tiny clips on both sides of the spotlights so that the rotation Angle is close to 180°. Then put it into the hole reserved for the ceiling and let go.
LED ceiling light
A ceiling lamp is typically divided into a base and a mask. The base part is integrated with a bead and an initiator.
When installing a ceiling light, secure the base to the ceiling. Then connect the base to the reserved junction box (the base has a tiny hole to pass through the wire).
After the wiring is complete, secure the mask.”